It shuts off automatically with overheating and tip-over protection.
Quiet and comfortable convection heating technology.
IPX4 water and drop resistant*
Accurate digital thermostat with six temperature levels.
Smart control using the Xiaomi Home app.
A warm home for you
Remote control via the Xiaomi Home app.
Monitor room temperature anytime, anywhere. Use the app to turn on the heater remotely.
Customize it to your heating needs with 4 timers and 6 heat settings.
18/20/22/24/26/28°
°C
Six temperature settings
1/3/5/9
sa
Four timer settings
Enjoy comfort whenever you want.
Intelligent temperature control for a comfortable environment and power saving.
When the ambient temperature is lower than the preset temperature, it automatically continues heating; when the ambient temperature reaches the preset temperature, it automatically reduces power or stops heating. With its built-in adjustable thermostat, the heater keeps your home at a comfortable temperature and saves more energy than many non-thermostat electric heaters.
Temperature (°C)
Constant temperature setting
Duration (min)
Thermostat-controlled electric heater
Electric heater without thermostat
*The figure is not an actual test diagram, but a schematic diagram of the principle.
It heats up instantly.
No need to wait.
Temperature (℃)
2200 W high power
Speed up the appliance to heat up.
Duration (min)
Mi Smart Heater S Heating curve (based on experimental data)*
Two-way heat emission, natural convection.
Allow the heat to spread throughout the room.
Heated air rises and cold air descends, creating a convective effect for air circulation and room heating. Large front and top air ducts allow for heating of immediate areas and the entire room.
Comfortable and quiet.
It creates airflow to generate convective warm air flowing in both directions, from above and from the sides. The airflow is gentler than an air conditioner and is not prone to dryness. It won't disturb your sleep at night or cause dry eyes and throat in the morning.
Gentle airflow
Low level of dryness
Wide air duct design for faster heating.
With an optimized air duct, the temperature rises faster and spreads rapidly throughout the house.
Water-resistant protective coating
IPX4 water and drop resistant*
Overheating protection sensor
Rollover protection
Overheating protection. Shutdown in case of tipping.
Advanced security
Child lock
Use a wall socket to reduce the risk of the circuit breaker cutting off the power.*
Small and flexible body
Integrated drying rack design.
With its simple and practical body design, the heater is small, flexible, and easy to carry. The integrated drying rack has a drying capacity of 1.5 kg while heating.
Warm-up Tips
When using an electric heater, it's recommended to first set the thermostat to the maximum temperature and close the doors and windows to heat the room. Allow 20-30 minutes for the heat to dissipate, then adjust the temperature to your preference. The heating effect will be better after the room has been preheated.
Notes regarding area of use
Factors such as the height and insulation of the house will affect the heating effect. Privately constructed buildings with limited insulation and new buildings with high humidity levels can also impact heating performance. If your house is on the top floor, receives limited sunlight, has large windows, or is located in a cold region, this can also affect the heating process.
Limited sunlight
Cold area
Upstairs
Large glass windows
In the situation described above, it is recommended to use the heater in an area no larger than 10m².
Under optimum conditions, the heater's performance is suitable for areas up to 20m².
*Using multiple high-power electrical devices simultaneously can overload the extension cord and cause it to automatically disconnect. Using a wall socket or a high-power electrical plug is recommended. Sharing the same electrical plug with other high-power electrical devices is not recommended.
*All data on this page is sourced from Xiaomi Laboratories unless otherwise stated. Test data may differ from the actual product due to environmental factors.
*IPX4 water drop resistant: Data obtained from the China National Radio and Television Product Quality Supervision and Inspection Center. Report No. C-00201-19-2057-S.
*Mi Smart Heater S Heating curve (based on experimental data): According to the test conducted according to the corporate product standard, after 1 hour of operation at 2200 W power with an initial temperature of 23°C, the ambient temperature rises to 13.6°C. Data from the China Institute for Testing and Inspection of Electrical Appliances. Report No. Wrn-19-478.
Goes well together
ORIGINAL PRODUCT, FAST DELIVERY, SECURE SHOPPING — THE RIGHT ADDRESS FOR TECHNOLOGY
